Thread: Well, just ordered my CMC PT-35 tilt & trim from iboats

Here are the pics. The junction box is 6"x6"x5" it could be bigger butit works. I put the relays in it and a switch so I could put the transom saver on by myself.

thanks ole blue

ok, got it installed yesterday and tested and man it is sweet, moves up and down lots faster than I expected, gotta go get my box to put the relays in today and then will have to run my wires to my battery. does anyone know if it will hurt to shorten or splice in to the wires if needed ? reason I ask is that my switch wires are way longer than needed and the power cables are to short.

thanks

As long as they're terminated or extended the proper way, won't hurt a thing. Go ahead and spring for the heat shrink ends and butt connectors. Last thing you want is to be stuck in the up or down position due to a short from water intrusion.

Wannabe...

Originally Posted by Wannabe...

As long as they're terminated or extended the proper way, won't hurt a thing. Go ahead and spring for the heat shrink ends and butt connectors. Last thing you want is to be stuck in the up or down position due to a short from water intrusion.

Wannabe...

Thanks WB, got some of those (I think) will stop by ratshack and get some to be sure

m

You're welcome. Now let's see the CMC installed and quite teasing us with box pics.

Wannabe...

Originally Posted by Wannabe...

You're welcome. Now let's see the CMC installed and quite teasing us with box pics.

Wannabe...

will get some pics tonight posted

Originally Posted by Wannabe...

As long as they're terminated or extended the proper way, won't hurt a thing. Go ahead and spring for the heat shrink ends and butt connectors. Last thing you want is to be stuck in the up or down position due to a short from water intrusion.

Wannabe...

X1. Don't really want to say this but he is 100% right on this.
Also make sure you get a waterproof box or some thing to put the relays in they are REALLY testy and hope you enjoy it.