EZ poleholder

**blueball** · 11-23-2010, 11:09 AM

heres some pics of my boat i was telling u about awhile back will send u a private message too:D

**blueball** · 11-29-2010, 04:41 PM

btt

**blueball** · 11-29-2010, 04:45 PM

gene i will be pointing my rod the other direction and the reel will actullay be hanging over side of the boat in the front so i can still get in my rodlockers.the reel would actually be in the holder like the one in the pic,but turned around

**E-Z Poleholder** · 11-29-2010, 04:52 PM

Originally Posted by blueball

gene i will be pointing my rod the other direction and the reel will actullay be hanging over side of the boat in the front so i can still get in my rodlockers.the reel would actually be in the holder like the one in the pic,but turned around

OIC, You want the 6" offset which will actually go on the outside of the boat. Keep in mind, I make these up to 20" tall which is more than enough height to allow you to get into your rod box.. Are you planing on mounting these on the top of the rail? If so, what is the width of the rail?

**Minnerman** · 11-29-2010, 04:55 PM

Originally Posted by blueball

gene i will be pointing my rod the other direction and the reel will actullay be hanging over side of the boat in the front so i can still get in my rodlockers.the reel would actually be in the holder like the one in the pic,but turned around

Why don't you open your rod locker lid and mount your holders just a tad taller? That's what I did. This gets em off the floor and away from some gewbers size 11's or in my case it keeps my kids from Usin my rods as door mats.

**blueball** · 11-29-2010, 05:04 PM

not going to mount on the rail but on the carped deck as close to the alum rail as possible

Originally Posted by E-Z Poleholder

OIC, You want the 6" offset which will actually go on the outside of the boat. Keep in mind, I make these up to 20" tall which is more than enough height to allow you to get into your rod box.. Are you planing on mounting these on the top of the rail? If so, what is the width of the rail?

**blueball** · 11-29-2010, 05:06 PM

Originally Posted by Minnerman

Why don't you open your rod locker lid and mount your holders just a tad taller? That's what I did. This gets em off the floor and away from some gewbers size 11's or in my case it keeps my kids from Usin my rods as door mats.

don`t care if they open all the way minner ,figured i would attach a bungie or something from the inside of the compartments and tie to rod racks when needed and thats not much

**Wannabe...** · 11-29-2010, 05:12 PM

Poor Gene....I can just see him now....laying on the floor on his side trying to cypher on the top pichur to please another customer. It's folks like you BB, who give folks like Gene cricks in their necks.

Wannabe...

**blueball** · 11-29-2010, 05:26 PM

Originally Posted by Wannabe...

Poor Gene....I can just see him now....laying on the floor on his side trying to cypher on the top pichur to please another customer. It's folks like you BB, who give folks like Gene cricks in their necks.

Wannabe...

yeah i know i tolt him if he wanted he could sent the top parts to me unwelded and i would put them where i needed hehe

**"G"** · 11-29-2010, 06:43 PM

BB....I got the top parts un painted etc. and I am making my own stands and bases. Thats easier than trying to explain to Gene how I want them to fit my boat. The two stand heights are going to be different on mine to make the poles lay level with the boat....different deck heights.....plus I need a off set more on the front one than the back one etc. just kind of hard to explain to somebody if your both not looking at the boat itself. Any how....When I get through making the stands and bases and welding my top pat on etc...I will spray them with cold galvanizing compound....then plastic dip the holder parts and then paint the rest black and install them.

Thread: EZ poleholder

Thread Tools

Display

EZ poleholder

Posting Permissions