Thread: Today's quiz

Neighbors boo? Are you trying to switch from poo to boo? Bwahahaha :D

Originally Posted by DonDon

It'd be best to plain the top flat before you go to screwing those 2x12's on there. It'll be more stable in the long run having more contact with the poles.

I told ya'll that DD was a genious.



Oh Wait. Almost forgot about the upside down transducer bracket.:D

DD knows how to put those 2x12's on there with duct tape....just saying, lol. :D

Good idea dd.....you bring the planer.

Never thought I'd put that combination of words on a post. Least not in that order.

Wannabe...

Simple solution. Get your circular saw out and set the blade where it's as far out as it will go. Next, get some chalk string line and POP you a line done each side so it'll be straight, then turn the saw 90 degrees to how the boards will sit and run down each side with the circular saw. That'll get ya a good bit through the pole for a start. Get a wood chisel and hammer to finish making the cut all the way through it and you're set bud. You won't need to cut but about an inch to an inch n a half off the top to flatten it enough to where the boards will sit flat

Good idea. You bring the skill saw.

Wannabe...

Why not just use a chain saw to eliminate the need fer the manual labor of the hammer & chisel. See WB, he ain't as smart as everybody thinks he is.

but WB would cut his leg off with it