Likes Likes:  0
Thanks Thanks:  0
HaHa HaHa:  0
Results 1 to 2 of 2

Thread: Hey Moose

  1. #1
    Barnacle Bill's Avatar
    Barnacle Bill is offline Super Mod and 2014 Crappie.com Man of the Year * Crappie.com Supporter
    Join Date
    Apr 2004
    Location
    Chesapeake, Va
    Posts
    20,251
    Post Thanks / Like

    Default Hey Canepole


    Did you get your trim tab to turn to the right? I've talked to several knowledgeable people and they all agree it should turn both ways. One says there is a locking ridge in there. So you may have to loosen the bolt enough to get by it. I suspect then you will only be able to turn it to the right and straight back. Start with about 1/4 turn to the right.
    Fair Winds and Following Seas

    Bill H. PTC USN Ret
    Chesapeake, Va


  2. #2
    Join Date
    Jul 2005
    Posts
    755
    Post Thanks / Like

    Default from most threads...

    Quote Originally Posted by IBNFSHN
    Did you get your trim tab to turn to the right? I've talked to several knowledgeable people and they all agree it should turn both ways. One says there is a locking ridge in there. So you may have to loosen the bolt enough to get by it. I suspect then you will only be able to turn it to the right and straight back. Start with about 1/4 turn to the right.
    from most threads i have read from moose in the off topic forum i think his tab only turns to the left...LOL. Just kidding moose.... :D

    when i first tried adjusting mine it was hard to get it to turn slightly right to compensate for the pull on the steering wheel. I had to loosen the bolt a good bit before it would unlock enough for me to tweak it to the right. a good shot of wd 40 or similar lubricant might help...just a thought.
    incognito....... here fishy fishy fishy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP