Thermostat

I believe most of it will. I would want to replace that impeller for sure. Those are some nasty Chucks in there. I would definitely flush it out well while I had the foot apart to change the impeller/ water pump

Vet, look like you ran that motor in the parking lot. With the foot off you can flush upward through the water tube and then flush back through the thermostat opening before you install a new one. Do it both way many times.
PPG

Quote:

---

Originally Posted by PawPaw Gene

Vet, look like you ran that motor in the parking lot. With the foot off you can flush upward through the water tube and then flush back through the thermostat opening before you install a new one. Do it both way many times.
PPG

---

I would want as much of that out as I could. I had a motor that would overheat occasionally. Drove me crazy trying to find out what was causing it. Found a blown up umpeller all through the water jacket. I used a power washer to knock a good deal of it out of the block

Yep, that'll do it. Glad to see you found the issue.
Got me scratchin' my head now, 'bout runnin' skinny water.

You run skinny or not at all!!!


Sent from my iPad using Crappie.com

Quote:

---

Originally Posted by PawPaw Gene

Vet, look like you ran that motor in the parking lot. With the foot off you can flush upward through the water tube and then flush back through the thermostat opening before you install a new one. Do it both way many times.
PPG

---

Redfish parking lot…lol


Sent from my iPad using Crappie.com

I watched an advertisement for a tunnel hull with a jet running skinny. That boat had to be skimming the bottom. Scary stuff

Attachment 412541


Sent from my iPhone using Crappie.com

How much did you get out of the motor?

Quote:

---

Originally Posted by DockShootinJack

How much did you get out of the motor?

---

Working on it this weekend. Will post after I flush it


Sent from my iPad using Crappie.com