Thread: Humminbird Electronics

Originally Posted by Jigging15

Not sure if they do installs or not but have good things about these guys.
Tri-State Trolling Motor Repair: MotorGuide. Minn Kota. Trolling Motor Repair. Warranty Repair

Heard they are the best in the area.

I mounted mine myself. Its a Garmin 93SV but shouldn't make any difference. Had a guy help me fish the transducer cable from the back to the console. It was really pretty easy. Mounted the transducer on the transom where the original one was and it was plug and play in the console. My boat had a fuse block that you simply put a connector on the power and ground (you can get these at any parts store) and plugged into a 5 amp fuse spot. if you don't have the block, you can simply tie it into an accessory switch or motor circuit using a 5 amp inline fuse. I mounted it to the console with a Ram mount. Again, very simple. Marked it, drilled the holes and bolted it down. Used all stainless nuts and bolts. Took a couple hours. Good Luck!

They are easy to mount yourself if your mechanically inclined. Lots of info right here about installation.

I've never had tri state do an install, but have done business with them and they are always helpful. I would recommend them. That said, watch a you tube video or ten and install it yourself. Easy to do.