Okay fish here we go!!!!

I use the two part epoxy mix from Jann's Netcraft but you can buy the same at Barlows etc.

I use the bottom of a soda can to mix it, and get equal amounts by using two different straws, you know how you put your finger over the end of a straw in soda and you can trap the soda in it well the same applies to the two parts for epoxy.

I have never used a turner to dry jigs with epoxy. For paint I usually use Testor's model paint, I use a big piece of square styrofoam for a drying box (got mine from work from a computer packaging), I paint up a whole bunch of jigs and let them dry. I then mix up a batch of epoxy and start coating the painted jig heads (I use disposable brushes and use one for each color in case any smear) and put the the hooks points right back into the sty block to dry. The name of the game is a thin coat and let it dry, then do a second coat.

I keep track of the top of the jigs and if a spot of epoxy forms I brush it off and they all turn out fine.

If you don't want to mess with paint you can also switch to powder, but I use both.

Fatman