Drying Rack

[Illinoisgiller]

Lots of good ideas
This is the simple set up that I use for vinyl painting heads and eyes.

Materials list
2 chunks of scrap 1"X2" same length
3 or 4 deck screws depending on length
A couple pieces of craft foam- (it takes two layers between the boards.)
The jigs are pushed in between the foam pieces for a friction fit. It holds them very secure.
Has worked fine for me for a couple thousand jigs .ole Mike
I put an extra picture of a few jigs I tied with the heads.lol

[Fatman]

Alot of great ideas all

Fatman

[brimreaper]

Here is one my grandfather made years ago out of old clothes pins. He used it when he was spray painting jigs, I use them now when I am painting the eyes on them.

Attachment 16165

Attachment 16166

Attachment 16167

I made a version of this to work on my jig heads and it works great... wish I could thank your grandfather for a wonderfull idea..thank you for sharing this in here. It sure has helped me out a bunch.:D

[WhitePerchJerker]

Both are great ideas, thanks for posting