Powder paint problem

[Mike1234]

Can someone tell me what I’m doing wrong


Sent from my iPhone using Crappie.com Fishing mobile app

[skiptomylu]

I am not positive, but maybe the head was not hot enough? I use an alcohol burner to heat my jig heads to paint and I developed my speed and count, meaning I count at my speed how long I leave the head in the flame and then dip and swish side to side fast and out tapping any loose off. Then just because I'm hard headed I pass it back through the flame for just a pass. Then I use a sharpened tooth pick to clear paint from eye.

Skip

[SuperDave336]

I'm not sure on the powder paint problem but I am curious about this bar used to hold the jigs. I've seen that used frequently. Can I ask what it's called and where you purchase that from?

[Cray]

Is this before or after baking? If before your not heating head enough. Pass one back over heat source to see if it doesn’t smooth out. If after could be a problem of not hot enough or some problem I haven’t seen with paint.

[Mike1234]

Is this before or after baking? If before your not heating head enough. Pass one back over heat source to see if it doesn’t smooth out. If after could be a problem of not hot enough or some problem I haven’t seen with paint.

It’s before baking. I’m going to try and heat it longer and see what happens. I got the jigs off eBay I’m wondering if they could have something on them from when they where poured?


Sent from my iPhone using Crappie.com Fishing mobile app

[DockShootinJack]

Moisture in the powder paint causing it to clump

[Mike1234]

Moisture in the powder paint causing it to clump

It’s flowing real nice in bed it has been in factory container since I got it. When I’m done I put it back in jar and seal it up. If it flows good how can I check for moisture?


Sent from my iPhone using Crappie.com Fishing mobile app

[Mike1234]

Tj tackle. Can’t remember price but wasn’t bad
I’ve tried different times on heat. Using a heat gun on high. I’m wondering if my gun is wearing out I’m using 10 count I use to use a 6-7


Sent from my iPhone using Crappie.com Fishing mobile app

[Micropterus salmoides]

Not enough coverage and not enough heat.
No big deal, reheat the same heads and dip again.
Sometimes I double dip
With the clamps like that, you really can’t over paint.


Sent from my iPhone using Crappie.com

[Mike1234]

Not enough coverage and not enough heat.
No big deal, reheat the same heads and dip again.
Sometimes I double dip
With the clamps like that, you really can’t over paint.


Sent from my iPhone using Crappie.com

I’ll try more heat and see if that helps. I appreciate y’all help.


Sent from my iPhone using Crappie.com Fishing mobile app