Cleaned some up...

[RobJohnson]

I was in the shop earlier, cut the sprus off some heads, cleaned them up, and got them painted and baked...



Sent from my iPhone using Tapatalk

[DaveB40]

Hey Rob, first of all nice job, second, when you say you "cleaned them up", do you wipe them down
with some type of cleaner before you powder paint them. I have been having a problem with some
of the jigs I purchased from guys on e-bay and the like, in that the paint leaves bare spots and was
wondering if you guys that pour and paint might have some suggestions.
Thanx, Dave

[RobJohnson]

Dave, after pouring heads and letting them cool, you have to cut the spry off, then I used a small file to smooth that down and clean up any flashing around the head.
I then go straight to paint!
Could be you have something on the heads, or not heating them enough to melt the paint to them!


Sent from my iPhone using Tapatalk