Need some help with a sample jig

[liftbite56]

I was hoping someone here on this site has a Jacob bait mold for a 1/16 jig grub body Please...PM me I need some info and your opinion. thanks

[Whiptail]

I have a few and there very versatile. these are 1/32 oz. jigs I call no-names. the only problem is on my part to much powder paint heat and heads don't fit the mold without chipping other than that there awesome.

[liftbite56]

Thank you very much!! Just food for thought I use a carbide bur bit...to slightly modify my molds I bought a 5/32 to hone out a 1/32 to make a 1/24th head it may be what you need to solve your head paint issue...just my .02

[snake River]

I have a few and there very versatile. these are 1/32 oz. jigs I call no-names. the only problem is on my part to much powder paint heat and heads don't fit the mold without chipping other than that there awesome.

most of the molds are made for jelly jigs that I call him or grub jigs when Rick made those he used a plain jig head with no pain to get one that will work with the paint you need to paint a jigs had and send it to Rick he will cost them make the mold to fit with the paint on the jig head I had some special made with the pain so I could put them in the mold I do have some that you cannot paint input into the jigs had into the mold you can use goldplated jig heads they will work in your molds I went back to using the old style jelly jig molds if you need any more help please let me know we will gladly help you any way I can I Over 8 of those molds.