Well today I finally got the adhesive that Cadman recommended and I got to work building 2 new small 2" beds.

This was my example, I did not make this one:


Base, just a white tile


Brass air spout 3/16th


Bottom cups, the PVC on these two is different as they screw into each other where the other just sat together


Top cups - I'll be able to swap cups out quick for changing colors


Holes drilled and brass stems inserted but not sealed yet


Stems all sealed inside and out



completed beds


Weight on top to cure up


Here's the adhesive caulk a guy on Tackle Underground recommended - it came up a different name but it's the same stuff. Thanks for all the info!!

Only thing left is to get the mesh on the cups that another friend sent me, THANK YOU!!!!!!!!!. And Saturday we're ready to rock. Since I took the 20 gallon pump back and got the 60 gallon pump - I also bought a three way air valve!!! As small as they are I SHOULD??? be able to run all three at one time as long as I don't put too much powder in them.

I'm thinking I'm gonna have to get a different adhesive for the mesh though??

Enjoy - they really don't take long you just have to have everything ready to go.