This is my work station. It serves more than one function. If you look you can see the pile of holsters waiting to be finished. In be bottom left of the picture you can see holsters waiting to dry. The bock in the center of the table is a tooling block. The rag on top of it catches dripping dye. I take off the rag and use the top to work on jigs or flies. The vice comes off when not in use and I have a second vise bracket on the computer bench to the right of the work bench. It is the black thing on the left side of the computer desk. You can see the air compressor on the shelf in front of where I sit. I use it to hook up to my powder paint spray gun.. To the left you can see the blue box with switches and plug ins on it. I have the box hooked up to a foot switch. The vacuum is plugged in to the left plug and the vacuum pump to the right switch. When I hit the foot switch they both come on. If I need to use the vacuum I reach over and turn off the air compressor. When I am grinding with the Dremel I unplug the air compressor and put the Dremel plug in.