There has been a bunch of guys that take a 1/32 mold and then us a 1/4" ball mill to open it up to make a 3/32oz. Its worth a try but id do it with a 15/64 ball end mill espically if you can find somebody with a mill so they can set the depth to half of 15/64. Youd want to go with a very slow rpm like 50rpm. You have a little bit larger spru and little bit shorter collar than normal but they should be fine, i think id start and look at the do-it pro molds that are all the same size 1/32. Having a mold custom cut is probably $150+. I dont have access to mills anymore.