Stick on 3d eyes

[skiptomylu]

skip I use gorilla superglue you will like the container you can see the glue coming out .

I don't think that I can use that stuff as it expands and will just stick with the Zap Gel as I like it and just need to work on my techniques. Zap Gel is the ticket for me I think and the guy working at Hareline told me that is what he uses so can't be too bad since they carry so many items of glue.

Skip

[snake River]

Is the Gorilla Superglue a thick or runny formula?

it is not runny or thick I would say that is perfect after it dries you will not get anything apart you will have to cut it off we've been using it on the eyes with real good luck.

[Little Bear Crappie]

I have used the Components Systems Water Based Seal Coat over the recessed eyes on the minnow heads and they seem to stay on very well.Component Systems waterbased seal coat lure finish.

[snake River]

I don't think that I can use that stuff as it expands and will just stick with the Zap Gel as I like it and just need to work on my techniques. Zap Gel is the ticket for me I think and the guy working at Hareline told me that is what he uses so can't be too bad since they carry so many items of glue.

Skip

you're thinking of the gel for furniture skip I will enclose a picture of the two different models the one on your left is for furniture the one on the right will be for super gluing stuff together it is crystal clear that the one that they use for furniture is not clear and it will expand up their superglue does not expand it's like any other superglue that you buy over-the-counter but it is better.[/IMG]

[snake River]

I have used the Components Systems Water Based Seal Coat over the recessed eyes on the minnow heads and they seem to stay on very well.Component Systems waterbased seal coat lure finish.

I have never tried it but the next time I order I will definitely pick up a bottle.

[JUNGLEJIMJIGS]

I use 3mm on my small stuff and 4 or 5mm for my ultra minnows.Once I put the eyes in I use SH HARD AS NAILS.One coat after the eyes are put in and another after I tie the jig.I've never lost an eye,lose the jig before that happens.

[flatfish46]

Well I'm gonna Break down and tell Ya'll how to really do it I'm tired of the glue! put the eye's in the head Yes 5/32's also fit My heads if Your not heavy on the paint do all your heads before tying fluff your clear powder dipthe heads in then heat with lighter just till it look's like ice melting re-dip hang on rack if You use the type clear I use cure at 295-300 do NOT go over 320 the eyes are permanently bonded into the head and fussed with all the colors this dose not work on heads that do not have a recess or been prior cured before clearing the eye's will slide on the head a little THROW YOUR GLUE AWAY!

[snake River]

Well I'm gonna Break down and tell Ya'll how to really do it I'm tired of the glue! put the eye's in the head Yes 5/32's also fit My heads if Your not heavy on the paint do all your heads before tying fluff your clear powder dipthe heads in then heat with lighter just till it look's like ice melting re-dip hang on rack if You use the type clear I use cure at 295-300 do NOT go over 320 the eyes are permanently bonded into the head and fussed with all the colors this dose not work on heads that do not have a recess or been prior cured before clearing the eye's will slide on the head a little THROW YOUR GLUE AWAY!

thanks we will try those .