Si depth is still crazy

**zappaf19** · 05-25-2009, 08:27 AM

I up graded my soft ware but the depth read out is still going from 12' (right) to 573' (wrong) Do I need to adjust transducer?
Bill

**Joby @ Humminbird** · 05-25-2009, 10:39 AM

One thing to try is restore your factory defaults. If that does not correct the problem I would like for you to take a recording off of the unit and email it to me. My email address is [email protected]. I have a document that tells you how to take a recording and email if you need it.

**Arkie John** · 05-26-2009, 10:57 PM

Originally Posted by Joby @ Humminbird

One thing to try is restore your factory defaults. If that does not correct the problem I would like for you to take a recording off of the unit and email it to me. My email address is [email protected]. I have a document that tells you how to take a recording and email if you need it.

You consistently assist folks with your technical expertise. Thanks so much for your caring support!!!!

aj

**skeeter** · 05-27-2009, 05:38 AM

Originally Posted by zappaf19

I up graded my soft ware but the depth read out is still going from 12' (right) to 573' (wrong) Do I need to adjust transducer?
Bill

mine is doing the same exact thing... when you figure it out let me know please!

**J White** · 05-27-2009, 12:22 PM

Guys - just a WAG here, but IF you have ANY depth offset programmed in
on the setup page, zero it back out and see if that helps.

Thread: Si depth is still crazy

Thread Tools

Display

Si depth is still crazy

Joby, I wish everyone was and diligent as you!

Posting Permissions