Quote Originally Posted by Jamesdean View Post
I am not sure, but in my mind there's only two things to cause this. One the transducer leaving the water, and electric current interruption. That's my thoughts. If the connections are clean and tight, battery has enough juice, could be a problem in the wire itself. I would check all connections first, and if that didn't fix the problem then take a multi-meter and check the continuity of the wiring...before I went and forked out the dollars for another (dedicated) battery.
I believe it’s the transducer leaving the water. I think I’m going to have to lower it some more. It will end up being under the boat at this point. I have read that it’s not supposed to be that far under, but I won’t be able to keep it submerged while fishing without it being there.

Ended up having to stand on the right side of the boat to keep it submerged while trolling.

I noticed I had lost DI and SI while boating back at plane to the ramp just now. So I’m figuring that there is no water touching while going full speed.


Sent from my iPhone using Crappie.com