There is no cable to allow 1 transducer to be used at 2 different stations ...

You have 2 options :

1: Leave the xducer cable above the deck to reach both stations ...

2. Use HB xducer extension cable (EC W10 or EC W30) under the deck - which causes the following:

a. Disassemble the cable collector to remove the xducer cable ...
b. Connect male end of the extension cable to the existing xducer connector -
c. Move the head unit to station 2
d. Re-assemble the cable collector with the female end of the extension xducer cable

Rickie