Quote Originally Posted by jigflinger View Post
There is a button on the TM head that says "Find" Press and hold for at least 3 seconds. Should beep. Then press any button on the remote. I said it should beep. Mine doesn't. Give it a try. You might want to try a fresh battery in the remote, also.
in order to re-learn the remote the trolling motor has to be turned on !!! he can not get the trolling motor to power up !!!! that's is the problem !!!!

Remote Learning
The i-Pilot remote is prelearned to the controller from the factory. The top of
the controller has a single learn button to allow additional remotes to be added
to the system. To learn additional remotes:
1. Power up the trolling motor.
2. Push and hold the learn button down. A steady audio tone will be heard
while holding this button.
3. While holding the learn button down push any button on the remote
being programmed. Three short chirps will be heard when the remote is
successfully learned.
A remote can only be learned to one controller at a time. A controller can have
an unlimited number of remotes learned to it