Thanks Thanks:  0
HaHa HaHa:  0
Results 1 to 6 of 6

Thread: Lowrance HDS 12 freezing up- any ideas?

  1. #1
    Join Date
    Dec 2011
    Location
    Ok
    Posts
    1,719
    Post Thanks / Like

    Default Lowrance HDS 12 freezing up- any ideas?


    I have a one year old Lowrance HDS12 that has begun to freeze up a few times on every trip out. I have to shut off the electrical power to everything on the boat to reset it and get the screen up and moving and responding again. Anyone else experiencing this? Am I gonna have to send it back to Lowrance for repair? Thanks guys.

  2. #2
    rnvinc's Avatar
    rnvinc is offline Crappie.com 2016 Man of the Year * Member Sponsor
    Join Date
    Sep 2008
    Location
    West Ky
    Posts
    13,291
    Post Thanks / Like

    Default

    These type of intermittent issues are commonly caused by low or insufficient power ...

    Either a bad or low battery ...or using boat wiring for electronics (which is notoriously too small) ...

    Rickie
    www.podunkideas.com <--Click here
    ------------—————
    https://www.crappie-gills-n-more.com/
    https://cornfieldfishinggear.com/

    ------------------------>> Pro Staff Sonar Advisor
    Likes Crappie ciller LIKED above post

  3. #3
    dallman is offline Trophy King II * Crappie.com Supporter
    Join Date
    Dec 2011
    Location
    TN
    Posts
    339
    Post Thanks / Like

    Default

    I have an HDS 12 and I am on my third one in a little over three years. My first GEN 2 was replaced for that problem. But I would first run the wiring straight to the cranking battery. I used 14 gauge marine wire fused at the battery. But yours sounds like a power problem to me like Rickie said. The lowrance people are good to work with if you have to go that route.

    Don
    Retired USN
    Likes Crappie ciller LIKED above post

  4. #4
    Join Date
    Dec 2011
    Location
    Ok
    Posts
    1,719
    Post Thanks / Like

    Default

    Thanks very much. I rewired to the battery last week and am taking the boat out today so maybe that will do it.

  5. #5
    Join Date
    Dec 2012
    Location
    Franklin, tn
    Posts
    265
    Post Thanks / Like

    Default

    When I first got my hds gen 3 12's. I had the tendency to push the menu buttons to quickly and try to change from one thing to something else before the unit had time to recognize the previous comand and the unit froze up as you describe on several occasions ... Since I have got more familiar with the unit I don't give the unit a second comand before it had time to recognize the first on this seems to have solve my freeze up problem

  6. #6
    Join Date
    Dec 2011
    Location
    Ok
    Posts
    1,719
    Post Thanks / Like

    Default

    Thanks Ljones. Fortunately (or not) I am so slow with technology that I am unlikely to encounter that problem! After rewiring the power to the unit the problem did not recur last time out ( and it helped us locate over 200 crappie that joined us for a quick stay in the boat!) so I am hoping that it was indeed a power related issue.
    Likes Cane Pole LIKED above post

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP