HDS 12 Touch Water Temp

[l_tedford]

I have two hds 12 touches and neither one shows the water temperature. Is there a setting that could be turned off making the temp not show. Also the depth goes number goes in and out but the graph still shows the correct depth. This transducer is mounted on the trolling motor. Thanks in advance for the help.

[justinp61]

with the menu up on the right side of the page drag the hidden menu down press "edit overlay". You will have the option to "add", from the add menu select what displays you want to see on the screen. Make sure the "data overlay" button is highlighted on the hidden menu, it's right above the "edit overlay" button. You will need to do this on every page.

Make sure your td cable is clean and tight on the unit.

[bb no longer in business]

IF you've done the steps Justin suggested and still no temp, make sure each HDS unit has the Sonar/Temp settings in "Data Sources" set to read the attached transducer (this device) and the Scope is set to "Local" for each transducer. When 2 or more units are networked, and local is not set, the units try to find the correct device to read from the network and will cause you to lose the temp reading. You will see the 2 flashing lines.

Brian

[l_tedford]

I will try this fix tomorrow. Thanks for the help guys.

[l_tedford]

The hidden tab worked under over lay. Thanks for the help.

[justinp61]

Good deal.