Reply With QuoteYou need to make sure you have positive to positive and Neg to Neg. Red to Red and Black to black. If you have a jumper in the plug take it out.
Likes: 0
Thanks: 0
HaHa: 0
Keeper
Terrova 80 I-Pilot advice
Ok got my transducer set on the motor an I started looking at the power receptacle. Well, I'm def. no electrician nor real familiar with trolling
motor receptacles or plugs. The one that came on the boat is a 12/24 receptacle and a marinco 12/24 plug. I talked to one guy an all I got out of him was if I was making my 24v jumper on the batteries to take the jumper out of the plug, so I done that. Now to the part I'm needing a little help on. Is there a certain place to put hot an ground wires that are on the TM, they are four lugs on the plug. Is there anything else i need for the TM as well? Any advice will be greatly appreciate.
Crappie.com 2019 Man of Year, Supermod & Moderator of the Mechanics Forum
* Crappie.com Supporter
You need to make sure you have positive to positive and Neg to Neg. Red to Red and Black to black. If you have a jumper in the plug take it out.
Proud Member of Team Geezer
Charlie Weaver USN/ENC 1965-1979
Crappie.com 2019 Man of Year, Supermod & Moderator of the Mechanics Forum
* Crappie.com Supporter
Cleaned out my in box so you can re send PM
Proud Member of Team Geezer
Charlie Weaver USN/ENC 1965-1979
Posting Permissions
