power drive v2 control board replacement

[STUMP HUNTER]

My MinnKota PowerDrive v2 stopped working today and from the test I have run it looks like the control board has to be replaced. I have found a replacement board at Northland Marine and wanted to see if anyone has bought a board from them or is there another source that offers the boards. I'm replacing a 2034055 control board and it is 150 plus shipping. Any help would be very welcome, Thanks.

[wilbur]

Did you try Minn Kota, If you talk nice they might just send you one.

[STUMP HUNTER]

Did you try Minn Kota, If you talk nice they might just send you one.

I can't even get them to send me a remote cover, with me paying! LOL placed my order three months ago and was willing to pay their 17.00 and still nothing.

[Cane Pole]

I don't recognize that number. Do you have V2, or v2 autopilot, v2 copilot, or v2 IPILOT?? 12v or 24v?? I know a smidge about the V2's.
I have dealt with Northland Marine. They ok.

[cousinlll]

That's where i ordered my replacement control board from. Just use your TM serial number & double check the board part number against the parts diagram they have on their website. At times, the current part number board in your TM can be superseded to a different part number - the parts diagram for your serial number TM will indicate this. It's a quick 5 second change out.

http://www.northlandmarine.com/Minnk...PARTS_DIAGRAMS

LLL

[CatFan]

I'd check with Jones Trolling Motor. John is a good guy and will make sure you get what you need.

[Cane Pole]

If you have installed Ipilot, you may or may not need the board that came with your motor. Depends on your configuration.

[STUMP HUNTER]

I don't recognize that number. Do you have V2, or v2 autopilot, v2 copilot, or v2 IPILOT?? 12v or 24v?? I know a smidge about the V2's.
I have dealt with Northland Marine. They ok.

It is the V2 12v. The numbers are 230-4055 under that number is 095-423 12V. I have added the I-Pilot to this unit. Everything works right but the trolling motor. It will not come on. After I got home I tried by passing the board to make sure my motor was still working and it did come on but in one speed.

[crappiekiller2]

Here is where I got mine from. Looks like they changed the part #. They ship fast and low priced.
Minn Kota Powerdrive V2 Control Board #2304046

[STUMP HUNTER]

[QUOTE=cousinlll;2139212]That's where i ordered my replacement control board from. Just use your TM serial number & double check the board part number against the parts diagram they have on their website. At times, the current part number board in your TM can be superseded to a different part number - the parts diagram for your serial number TM will indicate this. It's a quick 5 second change out.

Minn kota Trolling Motor Parts | Bow Mount | Northland Marine

LLL[/QUOT

The one that is listed as non - pilot is it and the wiring is the same as the diagram.