Well kinda. I have 2 separate remotes (new style) which I somewhat disabled on the remote. I made the button much harder to push, not totally disabled.

I accomplished this by removing the cover, then filling the rabbit button contact area (inside) with RTV silicone. The RTV is level with the button contact point inside the rabbit button depression. The RTV will harden somewhat and make the button less responsive to the touch. You have to push harder than normal than the regular buttons to "rabbit". The rabbit button has to be intentionally pushed harder to "rabbit".

If you ever decide to remove the RTV and return the button to normal, you can use Loctite RTV remover which will soften the RTV and you can lift the applied RTV from the rubber pad.

This is a safety issue for me. Works fine.