Reply With QuoteYou need to check which map your 898 is reading.....i think it is in the set up menu
Likes: 0
Thanks: 0
HaHa: 0
Crappie Wall Hanger II
help with hot maps and hb 898
i had my hot maps card in a 798 that i sold. i just pulled card out. then i bought 898 and it dont change the map, did i loose data on my card? i also tried it in my 597 still nothing both units are new. any advise thanks
kost plus crappie team
Crappie Wall Hanger II
You need to check which map your 898 is reading.....i think it is in the set up menu
Crappie Wall Hanger II
i tried left card, right card and auto dont know if that is what your talking or not. i couldnt find a place that tells what map.im new at this 898
Crappie Wall Hanger II
I think if you have that on auto it should give you the hot maps....maybe rickie can help here
Crappie.com 2016 Man of the Year
* Member Sponsor
Push "Power" button...Originally Posted by warbird
i tried left card, right card and auto dont know if that is what your talking or not. i couldnt find a place that tells what map.
While welcome screen is showing.. Push "menu" button...
From the 3 choices ... Cursor down to "Status"...cursor right to open "Status" page...
At the bottom right of the "Status" page.. It should say what is in "Card slot 1" and "Card slot 2"...
If it is not recognizing the card....make sure the card is all the way in... It will slide in easily until it gets to the "spring loaded catch" in the slot.. Then it has to be pushed in against the "spring loaded catch" a little more to "catch"...
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
Crappie.com 2K Star General
* Crappie.com Supporter
You could also try testing your map card in a unit that has a working map card in it. Maybe swap map cards with a fishing buddy just to test. It could be that something is now wrong with the map card…
Crappie Wall Hanger II
card slot sayes nga-10 ,when i move to the other slot it switches like its suposed to. on the chart selectoin i have it on auto, ive tried right and left still nothing. dont know what contourxd is. it sayes 5.70 software too. thanks
Last edited by warbird; 02-24-2012 at 01:41 PM. Reason: thanks
Crappie Wall Hanger II
i tried it on a 597 in the front didnt work, its new too. i hope its not the card it was fine when i removed from 798, put it in its case and three weeks its bad hope not, hope its a button that needs to be pushed. thanks
Crappie Wall Hanger II
contour xd is built in mapping
Crappie Wall Hanger II
Posting Permissions
