Thread: bass tracker transducer mounting question

Originally Posted by blueball

i mounted mine on an alum block and made an alum shield on top:D

That looks pretty good there BB.

try the black tape if u want an easy fix ,i just wanted something nicer,but the tape works

The way I did mine is on the bottom side of the motor mount there is aluminum deal held on with to bolts I think its for corrosion aint exactly sure. But I used an aluminum angle and bolted it to there and then bolt the TD to the other end. Heres a pic But since this pic I moved it outward 6in. to get away from the step in hull. No drilling boat at all.

Click this bar to view the original image of 640x480px and 30KB.

That looks good too wilbur, I'm not satisfied with my TD mount.

wilbur u get any rooster tail where u got it mounted,might have to try that way looks good

Originally Posted by wilbur

The way I did mine is on the bottom side of the motor mount there is aluminum deal held on with to bolts I think its for corrosion aint exactly sure. But I used an aluminum angle and bolted it to there and then bolt the TD to the other end. Heres a pic But since this pic I moved it outward 6in. to get away from the step in hull. No drilling boat at all.

Click this bar to view the original image of 640x480px and 30KB.

Originally Posted by blueball

wilbur u get any rooster tail where u got it mounted,might have to try that way looks good

Not that ive noticed but you can see the top is covered by the angle. It didnt read at speed where i have it I moved it right 6in.