Thread: HB Greg & tommyboyrn

Don G and HumminbirdGreg
I loaded the older software onto my unit and then reloaded the newer version, everything seem to do well. Entered my settings, and off to the local lake today to use the transom transducer the see if the trolling motor transducer is the culprit. well BOTH TRANSDUCERS GAVE SIMILAR IMAGES.
I dont know what the problem is. Only thing else is the toggle switch connecting the 2 transducers together, but surely that would not affect the images that bad on both transducers.
I am gonna buy a dual beam trolling motor transducer just to make sure it is not the quad beam that is on TM now being the culprit, but now I am back to thinking it the unit itself.
Im kinda miffed that I paid the $$$ and something within my setup is causing it not to work properly. As I said, I used 2 different transducers today (front and back) with similar images.
HELP ME. Im wanting to smash it with a hammer
Here are my settings from today:
Sensitivity: 17-20
Upper level: 0
Lower Level:30ft
Chart Speed: anywhere from 7-ultra
Surface clutter: 1
83hz sens: 5
noise filter: medium
Max Depth:75ft
Here are the images:
Clear mode

Max Mode

Max mode,max sens, ultra chart spd

max mode using transom trnsdcr

Anyone got any ideas???????
Tom

I don't know but you have a problem or that's some of the clearest water I ever seen. I'm headed out to the lake today I will take some time and some pictures of mine, with settings.