Thread: HB 777c2 ?

Originally Posted by Fisherman_Wantabe

Fishing today and my 777c2 just rebooted never done that before. 1197 keep right on working, voltage reading on 1197 at the time was 12.4.
When 777 started back up all was fine, it and the 1197 showing all information pretty much the same

This ever happen to anyone else?? If so what was the problem?

Oh I was trolling with the trolling motor, but never even had any motor noise on the 777??

Alan, what is the sensitivity setting on your 777? Also, do you have fish ID off?

I have had no noise problems or reboot problems...

I would check to make sure your power connections are tight, don't forget the battery connectors too if it's wired direct.

Originally Posted by DonG

Alan, what is the sensitivity setting on your 777? Also, do you have fish ID off?

I have had no noise problems or reboot problems...

I think the sensitivity is set at 6 or 7. Fish ID is off. This the first time this one has ever done that.
The 1197 has went off before, after a long day of trolling, but never the 777 voltage would get below 11.5 after trolling all day.

Originally Posted by majflyboy

I would check to make sure your power connections are tight, don't forget the battery connectors too if it's wired direct.

Yes I checked all the normal stuff to check, the voltage was 12.4 with the TM running about 40%.
It just done it once no more problems after that.