Thread: Terrova sonar transducer mount

Originally Posted by craptacular

This is a great thread!

Unfortunately my Lowrance transducer is too big for the slot (someone else noted this)

Any Lowrance users using LMS or HDS? What transducer did you use that worked on the Terrova?

UPDATE!!

I tracked down a HS-WSX which is a Lowrance 200khz 20degree tranducer with a gray plug.

This doesn't have temperature, but it does have a smaller cable which will fit in the Terrova's groove.

I mounted mine tonight without any issues. I have yet to test the ducer with the HDS-7 but it should work just fine. Stay tuned...

Originally Posted by craptacular

UPDATE!!

I tracked down a HS-WSX which is a Lowrance 200khz 20degree tranducer with a gray plug.

This doesn't have temperature, but it does have a smaller cable which will fit in the Terrova's groove.

I mounted mine tonight without any issues. I have yet to test the ducer with the HDS-7 but it should work just fine. Stay tuned...

Well that was short lived.

The signal isn't very good on the HS-WSX with the HDS-7.

Called Lowrance and they said the HS-WSX would work...but apparently the Gray connector transducers won't work that well with Blue connector Sonars.

Unfortunately the Blue connector transducers wire is too thick to fit along the Terrova's shaft.

Anyone else worked around this?