Likes Likes:  0
Thanks Thanks:  0
HaHa HaHa:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Greg, Joby

  1. #1
    Join Date
    Jun 2005
    Location
    North-East Mississippi
    Posts
    4,819
    Post Thanks / Like

    Default Greg, Joby


    Could you explain uses for the ethernet port on the
    newer units? I'm not sure what I'd do with it. Will this at some time
    replace the comm port / interlink setup we have now, or is it only for
    "other" stuff? Maybe someday be able to share sonar data and such
    from multiple units like the "other guys"?
    Shoals Area Crappie Association

  2. #2
    Join Date
    May 2007
    Location
    Eufaula, AL.
    Posts
    2,186
    Post Thanks / Like

    Default

    Good question but I got no answer for it. I’ve been told nothing definite about this yet but many of us have been speculating about it… I doubt that anything official will be stated until these new accessories or a software update is available to make use of it. What these will be or when this will happen I just don’t know.
    Greg Walters at Humminbird
    [email protected]
    I help because I can

  3. #3
    Join Date
    Jun 2005
    Location
    North-East Mississippi
    Posts
    4,819
    Post Thanks / Like

    Default

    Allright then, appreciate it. At least I don't feel so bad now
    if ya'll don't know either :D
    Last edited by J White; 11-14-2009 at 04:30 PM.
    Shoals Area Crappie Association

  4. #4
    Join Date
    Jun 2005
    Location
    North-East Mississippi
    Posts
    4,819
    Post Thanks / Like

    Default

    Hmmm. Just had a thought - have any of you who have had your hands
    on an I-Pilot noticed if it has any unused ports, connectors, or other
    appendages?
    Shoals Area Crappie Association

  5. #5
    Join Date
    Jun 2005
    Location
    North-East Mississippi
    Posts
    4,819
    Post Thanks / Like

    Default

    Quote Originally Posted by J White View Post
    Hmmm. Just had a thought - have any of you who have had your hands
    on an I-Pilot noticed if it has any (as of yet) unused ports, connectors, or other
    appendages?
    bump. Jason H?
    Shoals Area Crappie Association

  6. #6
    Join Date
    Sep 2009
    Location
    WI
    Posts
    320
    Post Thanks / Like

    Default

    Nothing that I can see. Below are some i-Pilot pics, pre-install as well as installed on my Terrova 101.
    Attached Images Attached Images    

  7. #7
    Join Date
    Nov 2004
    Location
    Adamsville Tn
    Posts
    4,608
    Post Thanks / Like

    Default

    Jeff I like how your thinking..
    Be nice to be able to run the break lines with the trolling motor. Or it hold the breaks. Just hit a button on the GPS on the Humminbird and with the trolling motor do the work..

    Then if someone would only make me a rod that can catch my fish. HEHE I sure can't.
    Pete

  8. #8
    Cane Pole's Avatar
    Cane Pole is offline Crappie.com 2011 Man of the Year * Crappie.com Supporter
    Join Date
    May 2004
    Location
    Pumphouse Tn.
    Posts
    23,940
    Post Thanks / Like

    Default

    Quote Originally Posted by J White View Post
    Could you explain uses for the ethernet port on the
    newer units? I'm not sure what I'd do with it. Will this at some time
    replace the comm port / interlink setup we have now, or is it only for
    "other" stuff? Maybe someday be able to share sonar data and such
    from multiple units like the "other guys"?
    Based on past history, I would bet the ports will be dedicated to HB chit only. But, we can hope.
    Member BS Pro-Staff and Billbob Pro-Staff
    Proud Member of Team Geezer... authorized by: billbob and "G"

  9. #9
    Cane Pole's Avatar
    Cane Pole is offline Crappie.com 2011 Man of the Year * Crappie.com Supporter
    Join Date
    May 2004
    Location
    Pumphouse Tn.
    Posts
    23,940
    Post Thanks / Like

    Default

    Quote Originally Posted by Jason Halfen #511 View Post
    Nothing that I can see. Below are some i-Pilot pics, pre-install as well as installed on my Terrova 101.
    Do you find having to record a track before you "use it" a pain in the a$$?
    Member BS Pro-Staff and Billbob Pro-Staff
    Proud Member of Team Geezer... authorized by: billbob and "G"

  10. #10
    Join Date
    Sep 2009
    Location
    WI
    Posts
    320
    Post Thanks / Like

    Default

    Quote Originally Posted by Cane Pole View Post
    Do you find having to record a track before you "use it" a pain in the a$$?
    Not in the least. I typically have a pretty good idea about the types of trolling passes or casting runs that I want to make. Rather than fishing that pass the first time through, I'll activate the i-Pilot (which requires the my Terrova be deployed), and buzz the area at 5-6 mph while recording the track. Once I get to the end of the trolling pass/casting run, I'll stop recording, turn the boat around, and then follow the track back to the beginning at the appropriate speed.

    i-Pilot eliminates the constant need for the angler to attend to boat control tasks. Investing that small amount of time on the front end to record the desired track allows me to devote essentially all of my attention to fishing that water productively.

    I think back to my days of fishing "in the back of the boat", where someone else dealt with all of the boat control issues. The guy in the back often outfishes the guy in the front (at least in the walleye world!) because the guy in the back doesn't have to deal with positioning and controlling the boat...all he has to do is fish. i-Pilot provides that benefit to the guy who would normally have to split attention between fishing and boat control, and ultimately allows that angler to spend more time fishing and more time catching. In the end, isn't catching more fish what it's all about???

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP