Thread: interlink system

Greg, the dealer was Justin @ three rivers marine electronics,
of course I have no idea who he talked to - it's been several months
back so he probably doesn't either

another part of my setup - primary is one unit front, one back, as I said.
but also when I'm fishing a lot out the back like now, I've got a second station
and move front unit back onto it. I do this so I can run full screen sonar on one,
and turn sonar off, run full screen gps on the other.
Swap interlink cables around so it's hooked back up,
and now it reads through the puck on the other unit. Says "external remote" on the
diagnostic page. Works great. Only thing I've found is that the unit with the puck attached
has to be powered up first... if you fire the other one up first, it sees no gps ant and balks,
even after you power up the other. No problem once I figured that out. Also, running remote
like this, if you pop in an sd with waypoints on it to upload, it won't recognize it - put it in the
other unit tho and it will load to the network and show on both