Quote Originally Posted by Nightprowler View Post
New hobbies always start out with a ton of questions. So this time I thought I would do some homework before jumping in over my head to decide.
1. What are some of the different method used to get 2 colored baits? (head/tail, top/bottom, side/side)
2. Are there different molds or injectors for this?
3. When re-melting store bought plastic worms, what is the consistency I'm looking for? I heated a small amount in Pyrex, but it seems to cool very fast,
almost before reaching the spout. Maybe I need something smaller.....any advice?

Seeing all your Ultra-Cool baits make it harder to resist the temptation.

Thanks for any advice
NightProwler
there are many different ways on making two color baits the first one I usually pull the body off and leave the tail in the mold with them all back together and shoot the body the second way is you can use a syringe and shoot a cavity little bit on the belly and then go ahead and shoot the body the third way is I use the backside of the mold up against the cavities and shoot half turn it back around and shoot the other half then you will have 2 different color I do not recommend rebuilding plastics from the store first thing they are made from different companies and they are using different plastics so they may be a hard plastic soft plastic and super soft plastic so you really have a mass the only one side or e-mail are my own plastics that I know what it is I hope this will help you a little bit if you need any help night prowler send me a PM.I forgot to mention a fourth way that is using a dual injector for two colors.