I have been sinking brush piles for a few years now with good results. I have seen pictures of some of the crappie condos on here and decided to try something. I have access to hardwood strips, about 1" x 2" x 8' that is left over from ripping rough wood at work. The lake I fish is currently down 10' from normal pool. I was thinking that I would load up about 75 of the strips and drive them in the lake bottom in a rectangle shape measuring about 10' x 15'. I was thinking I would space the strips about 2' apart. This would require the 75 strips, so I know it would take a while. I thought I would find a spot that is currently 6' deep and drive them down even with the water. This would mean that the strips would stick up 6' off the bottom and would be in 16' of water once the lake fills up. I have a spot in mind that is a flat with the creek channel near by. This spot would also be away from boat traffic that could hit the strips. Would this work as well or better than the brush piles I normally sink? Is the spacing of 2' good? Should I go closer or farther apart? Thanks in advance for the feedback.