I have PPainted thousands. I use an electric paint stripper but a hair dyer will work ok. I hold the jig by the hook with a pair of forceps and heat it up, usually takes 5 seconds. Make sure the PP is stirred up good then dip the head in the pp and tap off the excess. Sometimes I mix a little glitter in some clear PP then redip them in that. After I do a couple dozen, I hang them in a toaster oven at 350 degrees for 15 minutes but make sure you clean the eyes out first cuz when you bake them the PP gets hard as steel. If when you dip them in PP and it don't gloss and flow out, you can hit the head with the heat untill the PP gets glossy and smooth.