Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: The almighty Beetle Spin! - questions

  1. #1
    Join Date
    Feb 2005
    Location
    Walden, NY
    Posts
    3,105
    Post Thanks / Like

    Default The almighty Beetle Spin! - questions


    I have photos of many fish I caught on the B.Spin that I plan on using again. Here are a few examples of lures used and short vs long arm:

    Name:  NtSQeHF.jpg
Views: 289
Size:  24.3 KBName:  5ABYo7Q.jpg
Views: 298
Size:  16.1 KBName:  b. Spin pickerel.jpg
Views: 296
Size:  14.6 KBName:  GcDG1JD.jpg
Views: 297
Size:  20.2 KBName:  IMG_2098.JPG
Views: 293
Size:  76.4 KBName:  2f4MYrc.jpg
Views: 296
Size:  31.8 KBName:  3rvMBXn.jpg
Views: 298
Size:  11.2 KBName:  0IAJx3l.jpg
Views: 294
Size:  19.4 KBName:  B.Spin crappie - clear plastic grub.jpg
Views: 291
Size:  14.9 KB
    What I like about the lure are the species of fish that attack it and the various trailer that can be rigged.

    This took this photo today of wire frames I made:
    Name:  IMG_9789.jpg
Views: 296
Size:  36.2 KB
    Note: all three frames were hand made. The middle one was the easiest to make using coated floral-arrangement, easily formed wire, a bead and ball bearing swivel.

    All the soft plastic lure below were hand poured:
    The lure on the left had the curl tail removed
    The middle lure has a flat straight tail
    The one on the right is similar in tail design but smaller

    Questions:
    1. what lures do you use with the B.Spin? (i.e. curl tail, no tail, small plastic worm, etc.)
    2. do you have a preference when it comes to lure length?
    3. do you like a smaller vs larger blade?
    4. do you prefer a longer or shorter arm coming from the lure?
    5. what weight jig(s) do use?

    The short-arm B Spin I use on the drop and hopping on the bottom.
    A longer arm I use for horizontal swims like that of a spinnerbait.

    Opinions and history welcome.
    Last edited by Spoonminnow; 05-24-2025 at 04:01 PM.

  2. #2
    CrappiePappy's Avatar
    CrappiePappy is offline Super Moderator - 2013 Man Of The Year * Crappie.com Supporter
    Join Date
    Apr 2004
    Location
    Lexington, KY
    Posts
    24,404
    Post Thanks / Like

    Default

    I probably haven't fished a BeetleSpin more than a couple of times. Biggest reason for not continuing to use it was getting the line wrapped on the "arm". I much prefer using a Road Runner.

    I have fished with (against?) a fishing partner that used a BeetleSpin, while I used a Road Runner, fishing shallow water spawning areas. I don't remember the exact tally, but would venture to say it was at least 5:1 in favor of the Road Runner.

    I get enough "by-catch" species when using a Road Runner, but my main quarry is Crappie, so I have little to no interest in those other species.
    Thanks Spoonminnow thanked you for this post

  3. #3
    Join Date
    Feb 2005
    Location
    Walden, NY
    Posts
    3,105
    Post Thanks / Like

    Default

    The nice thing about the b. spin is the number of different lures that can be used with it, as the photos show. If I hadn't recorded them, I would have never remembered catching fish using those lures. Now I'll have to stock some of them to add to the spin.

    Does anyone remember the Submarine Shad by Bagley - a tail spinner behind a painted lead body?
    Name:  submarine shad.jpg
Views: 245
Size:  19.8 KB

    I don't remember catching fish on the S S. They've been in storage (like 1000 other lures) for decades. Guess I'll have to give them a try and also the Road Runner (if I can find them...)
    Likes S10CHEVY LIKED above post

  4. #4
    Tradbow is offline Crappie.com 1K Star General * Crappie.com Supporter
    Join Date
    Feb 2019
    Location
    Eatonton, Georgia
    Posts
    1,943
    Post Thanks / Like

    Default

    I’ve caught a lot of fish on beetle spins. I’ve caught a lot on a roadrunner lure also. Fish them both as they work
    Likes SpeckledSlab, BDBFishing, peshtigost LIKED above post
    Thanks Spoonminnow thanked you for this post

  5. #5
    skeetbum's Avatar
    skeetbum is offline Crappie.com Legend - Moderator Jig Tying Forum * Crappie.com Supporter
    Join Date
    Dec 2007
    Location
    Tennessee
    Posts
    24,426
    Post Thanks / Like

    Default

    My start with spinners began with the Evans Shyster, an in line spinner. One of the next was the Little George, a cousin of similar to the submarine Shad. Along this way I was using bigger spinnerbaits for bass so I knew the concept was sound. I don’t remember exactly when I began using a BS but I can’t remember when there wasn’t one in my box. Different sizes and blade colors and styles of grubs make them extremely versatile and riding hook up they’re very weedless. Nowadays I use the smallest two sizes made and use whatever jig suits me that day. Some days a curl tail gets the nod while other days a hand tie with less activity does better. Casting or trolling I’ve done well with them and they’re one of my favorite search baits. I will locate fish and then switch to one of my hand ties for a smaller, less active bait. They’re also one of the best confidence builders for a young and excited new fisher. One of the best for keeping them focused and busy and the fish usually cooperate to some extent. The BS and the Rooster Tail both get a lot of use in my boat. I find my arms pre made and prefer the shorter arms for what I do. I still carry some of the bigger blades, dime size or maybe a touch bigger. I like throwing those around downed trees in shallow water when crappie are spawning. The thump on those is big. And much like our jigs, everything eats them.
    Last edited by skeetbum; 05-25-2025 at 08:56 AM.
    Creativity is just intelligence fooling around
    Thanks Spoonminnow thanked you for this post

  6. #6
    Join Date
    Feb 2005
    Location
    Walden, NY
    Posts
    3,105
    Post Thanks / Like

    Default

    Ah yes, the Little George. Got some of those hanging around somewhere.
    Great reply Skeetbum!
    Likes SpeckledSlab LIKED above post
    Thanks skeetbum thanked you for this post

  7. #7
    Join Date
    May 2018
    Location
    Central Florida
    Posts
    21,126
    Post Thanks / Like

    Default

    Road Runners and B-spins have long been staples of my tackle box. The Road Runners have been getting the nod more often in recent years. Versatility is great in being able to locate fish.
    Pass the "Sportsman Baton" on before you're gone, promote values for others to hunt and fish upon.
    Likes BDBFishing, Jamesdean, peshtigost LIKED above post
    Thanks Spoonminnow thanked you for this post

  8. #8
    Join Date
    Feb 2005
    Location
    Walden, NY
    Posts
    3,105
    Post Thanks / Like

    Default

    Versatility is great in being able to locate fish.
    No better words spoken!!!!!!
    Likes SpeckledSlab LIKED above post

  9. #9
    Join Date
    Mar 2010
    Location
    Georgia; South of the big A
    Posts
    3,731
    Post Thanks / Like

    Default

    Quote Originally Posted by skeetbum View Post
    My start with spinners began with the Evans Shyster, an in line spinner. One of the next was the Little George, a cousin of similar to the submarine Shad. Along this way I was using bigger spinnerbaits for bass so I knew the concept was sound. I don’t remember exactly when I began using a BS but I can’t remember when there wasn’t one in my box. Different sizes and blade colors and styles of grubs make them extremely versatile and riding hook up they’re very weedless. Nowadays I use the smallest two sizes made and use whatever jig suits me that day. Some days a curl tail gets the nod while other days a hand tie with less activity does better. Casting or trolling I’ve done well with them and they’re one of my favorite search baits. I will locate fish and then switch to one of my hand ties for a smaller, less active bait. They’re also one of the best confidence builders for a young and excited new fisher. One of the best for keeping them focused and busy and the fish usually cooperate to some extent. The BS and the Rooster Tail both get a lot of use in my boat. I find my arms pre made and prefer the shorter arms for what I do. I still carry some of the bigger blades, dime size or maybe a touch bigger. I like throwing those around downed trees in shallow water when crappie are spawning. The thump on those is big. And much like our jigs, everything eats them.
    I caught my first trout , a rainbow of about three pounds , on a black with white spots Shyster .
    I was an early teen at the time .
    “ The bigger the Bend , the Wider the Grin ! “
    Likes Spoonminnow, Jamesdean LIKED above post
    Thanks skeetbum thanked you for this post

  10. #10
    Join Date
    Apr 2017
    Location
    Indiana
    Posts
    1,166
    Post Thanks / Like

    Default

    Beetle spin and a purple plastic worm were pretty much the only 2 lures my Grandpa fished when we went fishing..usually a purple beetle spin to.
    He caught everything on the beetle spin, crappie, bluegill, channel cats and bass.
    I always fished with one when fishing with him also, they were the popular bait back then, late 60s to early 70s was 9-13 yrs old. We would go camp and fish for a week at a time.
    Likes gillchaser999, BDBFishing LIKED above post
    Thanks Spoonminnow, SpeckledSlab thanked you for this post

Page 1 of 3 123 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP