Thread: Putting eyes on jigs question

I use good ol’ Sally Hansen clear, and an applicator bottle. One little drop where I want to put the eyes at. Then let it dry for a few hours. After that I then clear coat the whole jig (just like if you were painting nails) with the bottle of Sally Hansen, let it dry a few hours and repeat. I usually 2 coats of clear to seal up every thing. I do all this before tying my jig obviously.

Turns out like this. . .





Nate.

Great looking jig. I also coat in Sally Henson but gorilla glue clear works to apply eyes.

I use the gorilla glue clear that has the brush applicator for adhering the eyes! Then I cover the head in sally hanson.


Sent from my iPhone using Crappie.com

Thanks everyone I will have to get some sally hansen it sounds like.

I will use either Sally Hanson's or super glue to adhere the eyes to the head, but the coat them over with UV Resin thick. Haven't lost an eye yet since I started doing them this way...

Have used everything under the sun and best I’ve found.

Bob Smith Industries BSI-205 Clear Slow-Cure Epoxy

https://a.co/d/fxeHGWj

My question is…. Do eyes make a difference to the fish or is it for the fisherman?


Sent from my iPhone using Crappie.com Fishing mobile app

Originally Posted by jigfisherx

My question is…. Do eyes make a difference to the fish or is it for the fisherman?


Sent from my iPhone using Crappie.com Fishing mobile app

That depends on who you ask. Some say yes, some no. Me I prefer with eyes, and put eyes on mine.