Thread: DI from trolling motor and SI from transducer on stern

There is no Y cable to allow DI from one xducer and SI from a different xducer to 1 display (except the Y cable used exclusively with MEGA 360) ...

It is possible to have each xducer connected to a separate display and then share DI and/or SI independently thru Ethernet ..

Rickie

How about the 9 M SIDBY cable? It has one leg marked DI and one SI.


Sent from my SM-T580 using Crappie.com Fishing mobile app

Originally Posted by slowhand

How about the 9 M SIDBY cable? It has one leg marked DI and one SI.
p

The 9 M SIDB Y cable splits of the 2d wires to allow getting 2d information from a separate xducer capable of 2d ...

The wires legs are labeled SI (side imaging) and DB (Dual Beam 2d) ...

Rickie

Originally Posted by rnvinc

It is possible to have each xducer connected to a separate display and then share DI and/or SI independently thru Ethernet ..

Rickie

Rickie can you refer me to a diagram,document or video that tell me what I need to buy and how to hook it up to do that?

Originally Posted by Crappieawlogist

Rickie can you refer me to a diagram,document or video that tell me what I need to buy and how to hook it up to do that?

Using a 2 head unit setup :

*Each head unit has an xducer attached ...
*HELIX units - each head unit needs an AS EC QDE Ethernet adapter cable https://humminbird.johnsonoutdoors.c...-adapter-cable
*One ethernet cable between the 2 head units https://humminbird.johnsonoutdoors.c...letype%3A27016

Then watch this


Rickie