Thanks Thanks:  0
HaHa HaHa:  0
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 33

Thread: vehicle maintenance

  1. #21
    Join Date
    Oct 2011
    Location
    MS
    Posts
    11,682
    Post Thanks / Like

    Default


    That's the only thing that scares me on the 6.7. Something goes wrong with the fuel system there's a 20+k repair bill. On the 6.0 it's only 2k for all 8 sticks

  2. #22
    Join Date
    Mar 2011
    Location
    MS
    Posts
    28,841
    Post Thanks / Like

    Default

    Quote Originally Posted by feelay View Post
    huh?
    What I said first time I heard this. 7.3s and apparently 6.0s fuel injection is run off of oil pressure. Low oil pressure and they wont crank or run, bad orings around the injectors will cause a miss as the cylinder will not get any fuel. Its a strange design but a very efficent one and it is a protective one, you can't run em out of oil, they will quit due to lack of oil pressure and still have 7 or so quarts of oil in them. Also, if you go too long between oil changes and the oil breaks down you lose performance because of a lower oil pressure. 7.3 powerstroke without oil pressure is scrapmetal!!!
    1990 Stratos 285 Pro 200 HP Merc
    SpyderLok Rod Holders
    Proud Member of Team Watch The Finger!!!
    (662) 458-8925

  3. #23
    Join Date
    Aug 2008
    Location
    Hernando, Ms
    Posts
    10,160
    Post Thanks / Like

    Default

    I fuel it, maintain it, run it.....and that sucker flat out will run!
    Carl's Guide Service
    Sardis Lake
    Enid Lake
    Grenada Lake
    901-734-7536
    Likes KDAVID1 LIKED above post

  4. #24
    Join Date
    Mar 2011
    Location
    MS
    Posts
    28,841
    Post Thanks / Like

    Default

    Quote Originally Posted by feelay View Post
    I fuel it, maintain it, run it.....and that sucker flat out will run!
    Good trucks for sure!!!!
    1990 Stratos 285 Pro 200 HP Merc
    SpyderLok Rod Holders
    Proud Member of Team Watch The Finger!!!
    (662) 458-8925

  5. #25
    Join Date
    Oct 2011
    Location
    MS
    Posts
    11,682
    Post Thanks / Like

    Default

    Quote Originally Posted by Rees Guide View Post
    What I said first time I heard this. 7.3s and apparently 6.0s fuel injection is run off of oil pressure. Low oil pressure and they wont crank or run, bad orings around the injectors will cause a miss as the cylinder will not get any fuel. Its a strange design but a very efficent one and it is a protective one, you can't run em out of oil, they will quit due to lack of oil pressure and still have 7 or so quarts of oil in them. Also, if you go too long between oil changes and the oil breaks down you lose performance because of a lower oil pressure. 7.3 powerstroke without oil pressure is scrapmetal!!!

    Yep they are both HEUI versus common rail on 6.7
    On the heui any hpo (high pressure oil) ) leak will cause no start, bad running, etc. And Feelay is correct---the 6.7 is a beast.

  6. #26
    Join Date
    Aug 2008
    Location
    Hernando, Ms
    Posts
    10,160
    Post Thanks / Like

    Default

    Quote Originally Posted by KDAVID1 View Post
    Yep they are both HEUI versus common rail on 6.7
    On the heui any hpo (high pressure oil) ) leak will cause no start, bad running, etc. And Feelay is correct---the 6.7 is a beast.
    I freaked out a dude in a new corvette other day!
    Carl's Guide Service
    Sardis Lake
    Enid Lake
    Grenada Lake
    901-734-7536
    Likes Rees Guide, KDAVID1, "G" LIKED above post

  7. #27
    Join Date
    Oct 2011
    Location
    MS
    Posts
    11,682
    Post Thanks / Like

    Default

    Very cool. It's amazing what these 8000lb trucks can do. And the best part is to get more it only takes a bit of computer tuning

  8. #28
    Join Date
    May 2006
    Location
    Horn Lake, MS
    Posts
    9,566
    Post Thanks / Like

    Default

    While on vacation this week I needed a tire for the camper. So a visit to a walmart. 5 quart jug of my oil was $18, 1 quart bottle was $2.19. I bought 3 cases.

  9. #29
    Join Date
    Oct 2011
    Location
    MS
    Posts
    11,682
    Post Thanks / Like

    Default

    Wally world does have the best prices on oil. Rotella 5w40 here. Almost 4 gallons at a time

  10. #30
    Cray's Avatar
    Cray is offline Crappie.com 2019 Man of Year, Supermod & Moderator of the Mechanics Forum * Crappie.com Supporter
    Join Date
    Oct 2010
    Location
    Byhalia,Mississippi
    Posts
    17,343
    Post Thanks / Like

    Default

    Quote Originally Posted by wilbur View Post
    What is a Fumoto valve?
    Don't do it, we tried them on our leasing fleet. Over time they started leaking and some got knocked off. On something like his pickup might be ok but not on the big truck.
    Proud Member of Team Geezer
    Charlie Weaver USN/ENC 1965-1979



    Likes KDAVID1 LIKED above post

Page 3 of 4 FirstFirst 1234 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP