Looking for a welder in the Lafayette area

**ranger-go-getter** · 06-22-2015, 11:51 AM

Ok that wouldn't take much time Get with me. I live off Gloria switch.

**Tracker123** · 06-22-2015, 12:06 PM

Okay, thanks Derek. Will do. You live close by.

**"D"** · 06-22-2015, 10:44 PM

Randy, why not have a shop cut out a shelf from aluminum 1/4 plate , drill 4 holes through it and the existing shelf and bolt it on or pop rivet it on. You can make it a little deeper and let it stick out further if you need. You could even prime the exiting shelf to make it stop rusting. About a 30 minute project at most.

**"G"** · 06-23-2015, 05:40 AM

Or if you want to spend big bucks.....do like Danny says but use stainless steel......you could use a thinner piece if you use that.

**Tracker123** · 06-23-2015, 05:56 AM

I'll have to put some thought into that fellas. Thanks.

**Machinist** · 06-23-2015, 09:27 AM

I have a good friend that used to weld for a living and works on boats/trailers all the time, he's in the Duson area. If you would like to talk with him message me and I could give you his number. He has some steps similar to what you want on his trailer too lol.

Thread: Looking for a welder in the Lafayette area

Thread Tools

Display

Tags for this Thread

Posting Permissions