Thread: GPS and speed

Do you have the latest software version for the 581 ... ??

Rickie

Rickie I really do not know nothing about software. I just bought this thing to have GPS instead of having to use my handheld one. I know it has a place for some type of a card in the front. Do I have to buy some type of a lake card to get it to work properly. Just to really tell the truth I do not know or even how to know. Maybe if you explain it my daughter can help me. This is not the down image one it is just the regular sonar.

You have the dreaded "doughnut" which is common on HB's, but apparently updating your software on the unit will correct it. Google HB updates and you will find out how to check what version you have and what to do to update if needed.

There have been additions in software updates that help with GPS speed issues ...

You should register your unit at http://www.humminbird.com/Support/My...bird/register/

Then log into your account and the latest version software will be listed for your unit ...

Copy and paste the download .bin to a fully formatted SD Card ...

Power on the unit and Restore Defaults under the Setup tab ...

Insert the SD Card into the card slot ... Answer yes to "Do you want to update " ... Answer No to "Do you want to abort" ...

DO NOT TOUCH THE UNIT.. during the update procedure ...

When the completion popup shows ... Remove the SD Card and Restore Factory Defaults again under the Setup tab ...

Rickie

Thanks Rickie and jimp for the help. I will get my daughter's to help me on this. A lot of this I really don't know about as back when I went to school they wasn't no such a thing as a computer but I am learning. It's good to have good people like ya'll here on crappie.com that take your time to help others like me. That don't know very much about sonars or computers as far as that goes. Thanks again and I will post about the outcome when I get it updated and tried out.

When you do scrat, try looking at the GPS Diagnostic View and tell us what the Fix Type and EPE numbers are. You will have to set this View to "Visible" by going to the Views menu tab and scrolling down until you find it. Once set to "Visible" you will have to exit out of the menus and scroll through the visible Views until you come to it.

Thanks Greg I will get back with you'll when I get the SD card and when I can get my daughter to help me do the update.

Scat, your best response - "I will get my daughters to help".

I am fairly computer savvy, but it gripes me so to have to do this stuff at my age. You are on the right track.