Thanks: 
HaHa: 
Reply With QuoteDon't know but if it was me I would tear it down. Get numbers from bearings and seal. Clean,repack and reinstall. That way you know for sure what you get will fit if you ever need them.
Trophy King II
wheel bearing size
Can anyone tell me what size bearings are used on a 1991 ranger trail trailer. I need to get a spare set for an emergency but their are a couple different sizes. Any help would be appreciated. Thanks superfly.
Crappie.com 2019 Man of Year, Supermod & Moderator of the Mechanics Forum
* Crappie.com Supporter
Don't know but if it was me I would tear it down. Get numbers from bearings and seal. Clean,repack and reinstall. That way you know for sure what you get will fit if you ever need them.
Proud Member of Team Geezer
Charlie Weaver USN/ENC 1965-1979
Crappie.com Legend
I would do the same. I suppose you could measure the outside diameter and inside with a caliper gauge to know what axle you have. I would still spend the time and tear it down.
Redge LIKED above post
Slabmaster
id and od will not get it. Tapered roller bearings have different widths too. only way to know for sure is to tear it apart, clean and get the numbers. Chances are that the numbers on the seal is gone, and will have to be measure with some calipers to get the correct one. The Inside bearing will be a smaller size than the outer bearing
Crappie Wall Hanger II
Call Ranger with the vin # of your boat and they are more than glad to give you the part number so you can pick them up at Oriely's. Their customer service is second to none!
