Go ahead and spend a little more and get the 859 ci Hd Di!!! Call David at shup up and fish! ! Best prices around he is a sponsor on here, check the classified section! !!!!
Thanks: 0
HaHa: 0
Well, I need some information does anyone out there use Hummingbird 688 CI HD DI fish finders are the 788 CI HD DI has anyone had any trouble with these two what is the difference in the six and the seven are they any good.Is the 788 ci hd di worth the difference in the price.
Go ahead and spend a little more and get the 859 ci Hd Di!!! Call David at shup up and fish! ! Best prices around he is a sponsor on here, check the classified section! !!!!
Pro Staff:
Excel Boat (Meatgetter Edition)
Crappieholic Apparel
Hi-Tek Stuff
Ozark Rods
Please support these great companies!
7 has 640 resolution and 2 card slots .....6 has 480 and 1 slot. the extra card slot is big. with the 600 series if you have a map card in you can't save snapshots or video.
Crappie bite twice a day. 15 minutes before I get there and 10 minutes after I leave.
The sheep live in fear of the wolf but in the end it's the shepherd that eats them.
The two loudest sounds are a gun that goes click when it is supposed to go bang and
a gun the goes bang when it is supposed to go click.
My 788DI will not read below 1.5 MPH. If you slow troll, that speed is worthless. Some on here will tell you that theirs will read in 10ths and they are telling you the truth. But according to the people at Minn Kota you're just lucky if you get one that will.
Tell'em I'll be there.
My 898hd si reads fine in the 10ths play with the settings until you get a decent picture!
fosh
I've had 5 Garmin etrex handheld gps and work great but they will show speed and distance even not moving. Since they are non magnetic compass you must move about 1 mph for arrow to point correctly. Other words it might say 50 ft to waypoint but arrow will not point correct direction unless moving.Would work great for trollers as mine show speed down to tenths of mph.
Moderator of Beginners n Mentoring forum
Takeum Jigs