Dual injector problems AGAIN

**crappiefarmer** · 05-27-2014, 06:49 PM

Originally Posted by snake River

I would truly love to use the dual injector to make a marble effect is if I can figure out a way to twist the mold why I am shooting I think it would be cool to have a marbling effect.

Have You tried taking the cross bar off the top and pump each injector independently? Short little alternating pumps on each injector might get the job done on small baits.CF

**crappiefarmer** · 05-27-2014, 06:52 PM

Originally Posted by JohnPaul

One color is hotter than the other is what the deal on the marble look. And also 1 color going up the blending block into the other is due to one color hotter than the other. Want another neat effect kinda spin the injector while shooting.

JP, I think Your dead on on my problem. the bypass happened on a second attempt without re heating which made the problem worse. I got a thermometer yesterday and tried it out this morning. I could not believe the range of temp I had been working with on the plastics. I want to thank everybody who has had to pound it into my hard head to get one of these as it is going to save me a lot of headache.CF

**CTom** · 05-27-2014, 08:10 PM

When you are in control of the temperature you'll find that your colors will be crisper and cleaner looking.

**snake River** · 05-28-2014, 12:02 PM

Originally Posted by crappiefarmer

Have You tried taking the cross bar off the top and pump each injector independently? Short little alternating pumps on each injector might get the job done on small baits.CF

yes you can only use the injectors individually we have done this quite a bit.

Thread: Dual injector problems AGAIN

Thread Tools

Display

Posting Permissions