Thanks: 
HaHa: 
Reply With QuoteI bought the I pilot w/link and the 959 hd di yesterday and it want work together? Is it the built in transducer that you are saying want run the hd and di?
Crappie.com 1K Star General
Humminbird And I-Pilot
Why OH why can't they just figure out stuff right???
FYI if you have Humminbird 7-1100 units the or HD the I-pilot isn't compatible to run DI or SI you will have to "OLD SCHOOL" your unit by the way which you have to send yours back to them for them to swap it out unless you ask up front it's free, but check availability 1st I waited a
"MONTH" to get mine anyways not a big deal to do. Undo the 4 screws on the bottom of the I-Pilot head, unplug ground and hot wire these have a Blue wrapping , there is one more brown with a fuse it's hear shrink wrapped so remember to have an extra piece and slide it over the wire when you disconnect it ,then undo the cable which comes factory with the I-Pilot you won't need this anymore so pop the small black 3/4" holder plate off and pull it out, set the head to the side
Undo the screw under the head that goes through the shaft hold grasp all wires slowly slide the shaft out and down servo motor housing. I put my transducer mount on and used 2 zip ties to hold the wire securely to the shaft. Then fill the outer shaft intention with your choice of glue put the new transducer wire in and all the way through the servo motor mount and through the plastic keeper with the thumb twist knob then reinstall your head in the same way you took it apart. Any questions I'm here!! I put my new transducer wire right through the coiled up factory wire looks like it came from the factory!! Good luck and GOD bless!!!
$hane Ghent, Luke 5 1-11
https://www.troutmagnet.com/store/Crappie-Magnet-c-3.html
Crappie Wall Hanger II
I bought the I pilot w/link and the 959 hd di yesterday and it want work together? Is it the built in transducer that you are saying want run the hd and di?
Crappie.com 1K Star General
Yes sure ur Rookie40
It will work with the 2D sonar but not DI or SI!
$hane Ghent, Luke 5 1-11
https://www.troutmagnet.com/store/Crappie-Magnet-c-3.html
Crappie.com Legend and Arkansas Moderator
Shane has it nailed no DI with the us2 transducer. 2D isn't too bad. Sometimes you can find fish like this with it. 2D isn't so hot for seeing those imbedded in the brush.
RCC's Crappie Eradication Service
Eliminating your slab problems one fish at a time
For free estimates give us a call at O U 812.humblerev1 LIKED above post
Crappie Wall Hanger II
Is the DI worth the extra wires hanging off the motor? That kind of stuff really unnerves me. has anyone mounted the transducer to the back as Minn Kota recommends? This however defeats the purpose of having the unit on the front.
Crappie.com Legend and Arkansas Moderator
I have my bow unit networked to the console unit with a SI/DI tranducer on the transom. You have the option under the network tab to select the advanced sonar source. On the 998 at the bow, the 2d uses the us2 sonar on the trolling motor and when I switch to the si/di view it uses the transducer at the transom.Originally Posted by Rookie40
RCC's Crappie Eradication Service
Eliminating your slab problems one fish at a time
For free estimates give us a call at O U 812.
Crappie Wall Hanger II
I just got off the phone with Humminbird and thats what they recommend so looks like ill be upgrading the back unit. I think its a ploy to make you spend more money. LOL!!!!
Crappie.com 1K Star General
Man oh man is it
You can see the jig
$hane Ghent, Luke 5 1-11
https://www.troutmagnet.com/store/Crappie-Magnet-c-3.html
Crappie.com Legend and Arkansas Moderator
cool
RCC's Crappie Eradication Service
Eliminating your slab problems one fish at a time
For free estimates give us a call at O U 812.
Slabmaster II
Can you describe exactly what we're seeing? Where's the jig? Can you see the line too?Man oh man is it
You can see the jig
Posting Permissions
