Turning Point 17p prop

[chadw]

I have a 17p Turning Point Hustler prop that is too much pitch for my boat...It was ran for about 5 minutes total and i have since bought the same prop but a lower pitch..It will take all flo-torq hubs or you can order a Turning Point Hub as well..It is a 13.25 X 17P 3 blade....They are hands down the best aluminum props on the market with built in cup, tuned vents for better holeshot etc...they run as close to a stainless as any prop i have found. I will sell this for $75

Check them out here..Turning Point Propellers

Chad

[Marine]

will it fit a 70hp Johnson

[chadw]

will it fit a 70hp Johnson

as long as you put the correct flo torq or turning point hub in it. you can get on their site and use their prop calculator and it should tell you thats the nice thing about these props...

I just checked their site and it looks like it will fit..

[rattletrap 65]

looks like I might have missed out, anyway if marine doesn't take it i'll send you a pm with my phone number.

[chadw]

Prop is sold