I'm about to go to town on this flywheel! Wonder how much a new one costs. Maybe I look it up before I do!!!
"Snap-on Puller I have today and a massive Strap Wrench" Or maybe I needs one of them.
Printable View
I'm about to go to town on this flywheel! Wonder how much a new one costs. Maybe I look it up before I do!!!
"Snap-on Puller I have today and a massive Strap Wrench" Or maybe I needs one of them.
What are you using to crank down the puller? I have found an impact wrench helps.
I Don't know about Kroil. I usually us PB blaster...May have to soak over night to penetrate enough...Don't know...
IMHO Kroil oil is slightly better then PB blaster. And I love PB Blaster.Quote:
Originally Posted by BuckeyeCrappie
https://youtu.be/JvJ8WiwNGnE
Impacting my little heart to death! Dang thing, bent it, stripped it, it's garbage. This was the final try, I had done the high tension mallet hits already, I was just going for it. Something was gonna break.
Hmmm, what now boss?
My buddies saying is “I’m just gonna go for it, I’m either gonna break it or fix it”
Bigger Hammer! lolQuote:
Originally Posted by BuckeyeCrappie
I found higher quality pullers online, but they're at least a week out shipping wise. So I'm gonna drive around to some marinas tomorrow, maybe rural king too, and see what they got.
I'm going to weigh the hammer I use and post it in a few. It puts a whack on the puller. They do not come off as easy as one would think.
So I weighed it and here is a picture, it's a NAPA 48oz Ball Peen
Attachment 477475
Now I ring the Puller Bolt pretty good sometimes 40-50 times before the Flywheels will Pop. When they do the more stubborn they are the more they want to fly. Best of Luck Bud, if you were closer I would pull it for you.
I should add, when they Pop it's always a surprise to Me.