Printable View
Yes, I started not to post the pic as the world would see that I do not have my act together. I appreciate the comments. I tried to change contrast and a couple of other settings but still not there. Wonder if I should increase the kHz on the 2d? Could not find the toggle on the water so will need to check it out at the house. Thanks again.Quote:
Originally Posted by Roy
Sent from my iPad using Crappie.com Fishing mobile app
Sensitivity and contrast are the main 2 adjustments on 2d, also changing to a diffrent color pallet could help. Might try using max mode as well. Your di shots look great.
*Press Menu 1 time to open the Xpress Menu ...Quote:
Originally Posted by dhaire
*Cursor down to "Active Side" ...
*Cursor to activate Left side (Sonar in the noted combo you have showing) ...
*Exit out of the Menu ...
*Press Check mark button ✔️ to change thru the available frequencies (limited to the "Beam Frequency" selection under the Sonar tab) ...
Rickie
As usual, Rickie comes to the rescue. Thanks Rickie and I will do this tomorrow.Quote:
Originally Posted by rnvinc
Sent from my iPad using Crappie.com Fishing mobile app
Good shots fellas . Thanks for posting them...
Ok, thanks to Rickie I changed the kHz on the Sonar. Without his help I would have never found the toggle. Thanks, Rickie.
Attachment 317371
Sent from my iPad using Crappie.com Fishing mobile app
Looking good ... :ThumbsUpQuote:
Originally Posted by dhaire
Rickie
The Down Imaging has a wider beam than dual beam -- 2D can miss by a couple of feet
Both images look really good! Much improvement in the 2d, di is really sharp.
after finishing adjusting 2d when you go over brushpile if di do not show fish ,forget 2d and go on:popcorn