Lowerance elite ti

[Sawdustsavage]

I've had some problems with my elite7ti. The problem now is I can't get the downscan to function. It shows only blocks. I contacted lowerance and was told if I selected the wrong transducer in setup it wouldn't work. This is a replacement unit for a elite7 chirp. Thesecond one. The first one died in only a few days and the same problem with it on the down scan. When the elite7 chirp was replaced the first time I asked if the transducer from the chirp was compatible. I was told yes but the sidescan wouldn't work. No problem. I didn't have it on the chirp. If anyone has any ideas that would help me get the downscan working I'd be very thankfull
John

[rnvinc]

So what xducer is attached to the ti ... ??

There should be a silver tag close to the connector end ...

Rickie

[Sawdustsavage]

[QUOTE=rnvinc;3262930]So what xducer is attached to the ti ... ??

There should be a silver tag close to the connector end ...

FA XDCR SYLVESTER is on their tag
Is that it?

[rnvinc]

That should be the HDI 83kHz/200kHz selection in your transducer selection "Menu" ...

It is regular 2d and DI ...

Rickie

[Sawdustsavage]

That should be the HDI 83kHz/200kHz selection in your transducer selection "Menu" ...

It is regular 2d and DI ...

Rickie

Thanks for your help. I have it set to that now. Doesn't show black blocks now. I'll check it out Monday on the lake
That was probably the problem. I had it set on the generic one.
Thanks again. John