xi5, si and 360 working together

[kosmo]

Found this top loaded with fish, using my 998, while running the outboard.marked it, then used the 360 to position my boat to cast to it.used the ix5, in spot lock mold.TThere was a brisk breeze blowing but the ix5 held position very well[URL=http://s826.photobucket.com/user/kosmo012/media/Mobile%20Uploads/S01579_zpsre8eve9i.png.html][/URL[URL=http://s826.photobucket.com/user/kosmo012/media/Mobile%20Uploads/snp0411155709_zpsiocxzrdj.jpg.html][/URL

[brettw]

Nice
So you really only went over it once
Did they stay long?

[rnvinc]

That's putting them toys to work ...

Good job kos ...



Rickie

[Bean2302]

Great Job!!!!!

[kosmo]

That's putting them toys to work ...

Good job kos ...



Rickie

I do have a lot of money tied up in this fishing stuff, but it does make the fishing alot more relaxing. I now don't have fool with markers or have to fight the wind with the trolling motor."jjust fish"

[Redge]

Nice job Kosmo!
With the 360, if the BP is in the correct water depth, we just pull up to it with the 360 and look. Have quit driving over the piles and I think it has made a difference.

[kosmo]

After seeing and marking the structure, that had the fish suspended around it I navigated my boat back close enough to see the structure with 360.i used the xi5 to hold the boat at a good casting distance. The first picture shows my trolling motor, in the circled area (I'm using the Tandon mounted 360, with a 20ft. offset on a 21ft. boat).the second picture is showing that structure that I saw on the 998 si that's now showing on my onix, running the 360.The structure is around 20ft. ou in front of the boat.