I need HB bow 360 measurements...

[rnvinc]

I'm starting design of da'ducer apparatus® for the HB bow mount 360°...

Anyone have the bow 360° that can give me some measurements...??

Rickie

[Redge]

RDJJ has one and posts on here!!

[Rees Guide]

Got one more unit to buy and then a 360 transom mount, chompin at the bit but got to get the console unit first and move the 899 to the front and then get it, hopefully by the end of summer. Pondering not getting SI for the console being as I will have 360 at the transom but afraid I am may be giving up some clearer shots not having the SI, any thoughts Rickie?

[BobB]

You can use the 360 for just SI and DI without ......it stops rotating. Some of the images I have seen from the 360 SI are not as good as the SI from the HDSI transducer, which will have longer elements and therefore, a narrower beam, which results in better resolution.

I think Kosmo may have posted some SI images from the 360.

[rnvinc]

Got one more unit to buy and then a 360 transom mount, chompin at the bit but got to get the console unit first and move the 899 to the front and then get it, hopefully by the end of summer. Pondering not getting SI for the console being as I will have 360 at the transom but afraid I am may be giving up some clearer shots not having the SI, any thoughts Rickie?

Most of the reports I've read on the forums is that guys are not even using their SI after they get the 360...

Seems as the 360 is advantageous in non-moving (or very slow) moving situations...

Conversely, the SI is advantageous in moving situations...

I guess your fishing style will dictate whether 360 replaces (or enhances) the SI...

Rickie

[rdjj71m]

Rickie, what measurements do you want? I have a AS 360 TM on my boat.

[Rees Guide]

Most of the reports I've read on the forums is that guys are not even using their SI after they get the 360...

Seems as the 360 is advantageous in non-moving (or very slow) moving situations...

Conversely, the SI is advantageous in moving situations...

I guess your fishing style will dictate whether 360 replaces (or enhances) the SI...

Rickie

Thanks Rickie, gonna say I would want it to enhance and with that much spent should just do the SI when I can. The SI at 5 mph idling with the outboard will be good to scout with, slo trolling minners I really think the 360 should help as far as looking in front of the boat.
Thanks again.

[rnvinc]

Rickie, what measurements do you want? I have a AS 360 TM on my boat.

*I need the diameter of the upper shaft (preferable with a micrometer)...
*I need the length of the upper shaft...
*I need a close up pic of the top of the shaft where the cables come out of the shaft...
*I need a close up pic of the bottom of the shaft where the shaft enters the xducer housing...

Thanks for your help rddJ...

Rickie

[rdjj71m]

Rickie, as soon as I get a little time I'll send it to you PM. I only have a set of dial calipers will that be OK?

[rnvinc]

Rickie, as soon as I get a little time I'll send it to you PM. I only have a set of dial calipers will that be OK?

A caliper measurement will be great...

Thanks again for your help...

Rickie